Product Description
Product description
RB-EXTGE-102H is an Industrial grade inline Cat5e/Cat6 PoE switch/extender, self powered, that extends UTP network twisted cable reach by another 100m for each instance. With very little load (1.4W of budget needed), cascading units can extend cable reach up to 500m. Such extender is ideal for PoE devices that must be installed out of the common 100m reach of regular cabling. It also can split PoE power and data for two different network clients (IP cameras, WiFi APs, IP phones, etc.)
On a 802.3af device, the extender doubles the twisted pair cable loop by a simple in-line insertion. The RB-EXTGE-102H works with both 802.3af and 802.3at standards.
Technical specifications
- Industrial design, hardened for very low temperatures
- Water and dust resistant IP52 rated for outdoor installation
- Low power consumption (1.4W/device) allowing multiple cascading with little power budget loss
- No external power required, simple in-line installation on the Cat5e/Cat6 cable: 3 port Gigabit Ethernet switch
- Compliant with IEEE 802.3at/af PoE standards
- Automatic detection of PoE PD and PoE PSE equipment (PoE power is shutdown if PoE handshake fails - protection for 3rd party non-standard gear)
- Pass Through Data Rates: 10/100/1000 Mbps half/full duplex: 1 PoE IN and 2x PoE OUT ports (3 way switch)
- PoE Input(Pin Assignment and Polarity): Both 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+)
- PoE Output(Pin Assignment and Polarity): 1/2 (+), 3/6 (-), Output Power: up to 22W/port
- Connectors: Shielded RJ-45, EIA 568A and 568B
- Network Cable Type: Outdoor type Shielded category 5 (or higher)
- Dimensions: 185mm x 85mm x 40mm
- Mounting: Wall, mast or shelf
- Environmental Conditions - Operating Ambient Temperature: -25 to 55°C
Additional information on RB-EXTGE-102H PoE extender: 
PDF User Manual
